Light-emitting diode or LED lights have been all the craze among vehicle manufacturers and owners over the last few decades. These wonderful products of technology have provided motorists some solid advantages compared to their traditional halogen equivalents. But first, how do they work?
The thin filament of wire in a typical halogen bulb burns up over time, but
LEDs don't even a filament. It uses a semiconductor instead to produce light through electricity. So while halogen bulbs can last for about 5,000 hours, LED headlights can keep going for up to 22 years. This is clearly longer than most people will own a car, assuring lower maintenance costs.
LEDs also boast higher efficiency than halogen or even xenon lights. Read more now. They are actually more economical too. LED lights turn up to 90 % of the energy into light, compared to 20% for xenons and 60% for halogens.
As a result, this also makes LED-lit vehicles more fuel efficient. Because less energy is used, less power is drawn from a car's battery and engine, so the owner will spend significantly less at the gas station - savings that add up to a substantial sum over time.
Moreover, the quality of light produced by LEDs is even better. They produce light in the 6,000 degree Kelvin range, which is at the warmer blue end of the spectrum.
Blue lights provide more illumination and more contrast, so it's easier for drivers to tell objects in low visibility and cuts driver fatigue while being easier on the eyes of other motorists. LED lights also provide more visibility in fog or in other poor visibility conditions. Get more info on 4WD Supacentre. Additionally, LED lights provide even more enhancement to high beam assist, the technology that uses sensors for detecting the headlights and rear lights of other cars in front, instantly activating a vehicle's high-beam headlights on a clear road, or dimming them when another car is in sight.
Finally, headlights using matrix LED lights will stay dim when cars in front or behind are within range, but keep casting full high beam light on the both side zones. This happens because the high beams are actually made up of several individual LEDs that are set up in a row and column matrix. Activation, deactivation and dimming of these lights can be done within milliseconds, so the driver can still benefit from continued high beam coverage without having to compromise the vision of every other person on the road. Learn more from https://en.wikipedia.org/wiki/Automotive_lighting.
We just sent you an email. Please click the link in the email to confirm your subscription!
OKSubscriptions powered by Strikingly